Note
With the end position shutdown (p3392 = 1) and level-triggered sensor signals (p3394 = 1 or 2)
activated, once a stop sensor is triggered, the motor stops even if the level is canceled.
Parameters
Conveyor technology control parameters (Page220)
Advanced commissioning
7.9Conveyor technology control functions (for G115D PROFINET and AS-i variants only)
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA 197
To Next Page
Loading...
Need help?
General