Siemens SINAMICS G115D User Manual

G115D wall-mounted converter Standby current (mA)
Mains power supply with 24VDCpower supply
Frame size Rated power 380 V, 50 Hz 380 V, 60 Hz 400 V, 50 Hz 400 V, 60 Hz 480 V, 50 Hz 480 V, 60 Hz
FSA 0.37 kWto 1.5 kW 168 195 171 199 189 224
FSB 2.2 kWto 4 kW 204 239 209 246 235 279
FSC 5.5kWto7.5kW 287 338 296 350 339 404
11.1.4 Technical data of braking resistors
Requirements for the minimum resistance of braking resistors
For each frame size, the minimum resistance of braking resistors is required as follows:
Frame size Rated power Minimum resistance of braking resistors
FSA 0.37 kWto 1.5 kW 200 Ω
FSB 2.2 kWto 4 kW 80 Ω
FSC 5.5 kW to 7.5 kW 40 Ω
Technical data of integrated braking resistor
G115D wall-mounted converter Integrated braking resistor
Frame size Rated power Resistance Continuous braking
power
Peak braking power
1)
FSA 0.37kW to1.5kW 350Ω 10W 100W
FSB 2.2kW to4kW 175Ω 10W 100W
FSC 5.5kWto7.5kW 88Ω 20W 200W
1)
Peak braking power at 10% cycle time of a 120s cycle. For the peak braking power at di󹪜erent duty
cycles, refer to the following diagram.
%VUZDZDMF<>
#SBLJOHQPXFS
'4"'4#޵'4"'4#޵'4"'4#޵
'4$޵'4$޵'4$޵




<8>
Technical data
11.1Technical data of the G115D wall-mounted converter
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA 415

Siemens SINAMICS G115D Specifications

General

Brand	Siemens
Model	SINAMICS G115D
Category	DC Drives
Language	English