5.10.2.2 Conguring the star/delta connection of the wall-mounted converter
The star/delta connection is implemented inside the terminal box of the motor. You can
congure the connection according to the circuit diagram of the motor.
Star connection Delta connection
5.11 Connecting the 24 V power supply
WARNING
Electric shock due to unsuitable power supply
When equipment is connected to an unsuitable power supply, exposed components may carry
a hazardous voltage that might result in serious injury or death.
• Only use power supplies that provide SELV (Safety Extra Low Voltage) or PELV- (Protective
Extra Low Voltage) output voltages (maximum 60V DC briey) for all connections and
terminals of the electronics modules.
NOTICE
24 V power supply connection not available on AS-I variant
The AS-I variant is supplied with DC 24 V directly from the AS-I bus connection and therefore
does not have DC24V connections. All other variants have the DC24V power supply
connections.
5.11.1 Interface description - X01/X02
Connector variant
One of the two types of connectors (7/8" and M12 L-coding) is provided depending on the
variant that has been ordered.
Wiring
5.11Connecting the 24 V power supply
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA 77
To Next Page
Loading...
Need help?
General