Siemens SINAMICS G115D User Manual

B Bevel gearbox, two-stage
K Bevel gearbox, three-stage
C Helical worm gearbox
Stage
(-) 
E Single-stage
Z Two-stage
D Three-stage
Type
 Shaft
(-) Solid shaft
A Hollow shaft
Mounting type gearbox
(-) Foot-mounted design
B Foot/󹪞ange-mounted design
F Flange-mounted design (A type)
Z Housing 󹪞ange (C type)
D Torque arm
G Flange (A type) opposite output shaft
Connection
(-) Parallel key
S Shrink disk
T Hollow shaft with splines
R. SIMOLOC assembly system
Special features
W Reduced-backlash version
12.1.14.3 General technical data
WARNING
Exceeding the power limits
Exceeding the power limits (max. speeds, max. torque etc.) of the gearbox or motor can
damage the geared motor.
Maintain the permissible operating ranges and power limits of the motor and gearbox.
The max. speeds and torque shown indicate the mechanical limits of the geared motor.
Depending on the application, also take into account thermal limits. In applications with long
max. speed components, high pressure build-up may occur in the gearbox, which can cause
damage to the gearbox (e.g. leakage).
The most important technical data appears on the rating plate of the gearboxes and geared
motors.
Additional information on the SIMOGEAR geared motor
12.1General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA 441

Siemens SINAMICS G115D Specifications

General

Brand	Siemens
Model	SINAMICS G115D
Category	DC Drives
Language	English