Programming and Operating Manual (Turning)
01/2017
51
add the calculation result to the value in the input field at the current
cursor position and close the pocket calculator automatically.
For more information about how to use the pocket calculator, see Section "
Pocket calculator
75)".
Other common operations
10.1
Program control functions
You can perform further program control operations through the following operation:
+ →
With this softkey activated, the part program is executed with no axis or spindle
movement. In this
way, you can check the programmed axis positions and auxiliary function outputs of a part program.
This softkey functions the same as the following key on the MCP:
With this softkey activated, all traversing motions are performed with the dry run feedrate defined in
SD42100 DRY_RUN_FEED. You can set the dry run fee
drate in the JOG data setting window
through the following operation:
To Next Page
Loading...
Need help?
General
