Name: Yamaha TDM850 1996
Brand: Yamaha
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4-60

CRANKSHAFT

ENG

NOTE:

48 Nm (4.8 mkg)

CAUTION:

INSTALLATION

1. Apply:

 Molybdenum disulfide grease

(onto threads of bolts and nut seats)

 Engine oil

(onto crank pins and inner surfaces of connect-

ing rod bearings)

2. Install:

 Connecting rod bearings

 Connecting rods

 Connecting rod caps

(onto crank pins)

 Align the projection of bearing with the groove of

the caps and connecting rod.

 Make sure to reinstall each connecting rod bear-

ing in its original place.

 The stamped “Y” mark

on the connecting rods

should face towards the left of the crankshaft.

 Be sure that the letter

b on both components

align to form a perfect character.

3. Align:

 Bolt head

(with connecting rod cap)

4. Tighten:

 Connecting rod nuts

When you reach 3.5 Nm (3.5 mkg), keep tight-

ening until the final torque is obtained. Apply

continuous torque until the specified torque is

obtained.

Questions and Answers:

Need help?

Do you have a question about the Yamaha TDM850 1996 and is the answer not in the manual?

Yamaha TDM850 1996 Specifications

General