HEALTH AND SAFETY
27080 Issue 1 August 98 1--7
SYMBOLS
The following symbols are used in this manual. Where they appear
next to a procedure or instruction, they have the significance and
importance of written warnings and cautions.
Eye protection must be worn.
Protective clothing must be worn.
The equipment must be switched off and power removed.
Only trained personnel should carry out this procedure.
Beware of Electrostatic Discharge (ESD). Electrostatic precautions
must be used.
D Switch off machine first
D Wear a wristband connected to ground
D Avoid wearing clothing which can build up electrostatic voltages
D Use ESD protective bags to transport PCBs
D Only place PCBs on a mat made from a material which will
dissipate electrostatic voltages and which is connected toground.
To Next Page
Loading...
Need help?
General
