APPENDIX A : INSTALLATION
27080 Issue 1 Sept 98 A--5
PREPARING THE PRINTER FOR USE.
WARNINGS (1) During procedures involving the ink system,
protective clothing, especially eye protection and
gloves, must be worn at all times -- see Part 1 :
Health and Safety.
(2) The printer must never be started up with the
nozzle plate removed.
(3) Under certain fault conditions, the ink in the feed
tubes and gunbody could remain under pressure
when the printer is switched off. To catch any
escaping ink, place tissue around the nozzle plate
before releasing the securing screws, or around an
ink feed tube junction before disconnection.
Thefollowingprocedureswillrequireuseofthecontrolpanel. Consult
the general rules for using the keyboard (see pg. 2--8) and the glossary
of terms (see pg. 5--5) with particular reference to:
D the screen areas such as the status bar and the key option bar
D how to use the scrollkeys(to changethe functionkey actions) and
the function keys
D meanings of terms such as ”Select” (to press a function key, or to
step through the available options using the increment keys) and
”Enter” (to type in a value with the number keys)
D the difference between entering values with the number keys
(effect delayed until exiting the screen) and using the increment
keys (effective immediately).
To Next Page
Loading...
Need help?
General
