Rosemount Model 1195/ProPlate/Mass ProPlate
6-20
14. This screen offers three options.
• F
ile saves the flow information to a configuration file, which
can be sent by selecting T
ransmitter, Send Config... as
explained on page 6-39. (recommended).
• C
onnect switches to the Connect screen so that the flow
configuration can be sent to a transmitter.
• R
eturn switches to the EA.
NOTE
F
ile is recommended because it provides you with an electronic record
of your flow configuration.
NOTE
If you selected custom fluid, or made density or viscosity changes to an
AIChE fluid, be sure to save your information to a configuration file so
that you can modify the flow configuration information at a later date.
Although you can read a flow configuration from a transmitter, it is
NOT
possible to retrieve custom density, custom viscosity, or custom primary
element information. Therefore, be sure to save custom fluid
configurations
to a unique file.
Setup Compensated Flow (Liquid Configuration)
The Compensated Flow selection enters the user into the procedure for
configuring the Mass ProPlate to measure flow of a particular fluid.
The following screens illustrate how to define a liquid configuration.
Figure 6-14.
Flow Setup Screen
(Liquid Configuration).
To Next Page
Loading...
Need help?
General
