10-13
Process Isolating Diaphragms
316L SST.
O-rings
Glass-filled TFE.
Integral Manifold O-Rings
Teflon
®
.
Non-Wetted Parts
Electronic Housing
Low copper aluminum, NEMA 4x, IP65.
Paint
Polyurethane.
Bolts for Integral Manifold and Electronics Process Flange
316 SST.
Sensor Module Fill Fluid
Silicone oil.
Cover O-Rings
Buna-N.
Remote Mounting Bracket
All SST.
Sensor Mounting (including nuts, bolts and gasket)
CS (SS optional).
APPROVALS PENDING Hazardous Locations Certifications
Factory Mutual (FM) Approvals
$
Explosion Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition Proof for Class II, Division 1, Groups E, F, and G.
Dust-Ignition Proof for Class III, Division 1. NEMA 4X. Factory
Sealed. Install per Rosemount drawing 03095-1025.
%
Combination of Approval Code A and the following: Intrinsically Safe
for use in Class I, Division 1,
Groups A, B, C and D; Class II, Division 2, Groups
E, F, and G; Intrinsically safe for Class III, Division 1.
Non-incendive for Class I, Division 2, Groups A, B, C, and D.
Temperature Code T4. Install per Rosemount drawing 03095-1020.
Canadian Standards Association (CSA)
&
Explosion Proof for Class I, Division 1, Groups C, and D.
Dust-Ignition Proof for Class II, Division 1, Groups E, F, and G.
Dust-Ignition Proof for Class III, Division 1. Suitable for Class I,
Division 2, Groups A, B, C, and D. CSA Enclosure-Type 4X.
Factory-sealed. Rosemount Drawings 03095-1024.
To Next Page
Loading...
Need help?
General
