6-39
Transmitter Send Config
This screen allows sending three different types of configuration data to
a transmitter.
• Flow Configuration information only.
• Transmitter Specific information only.
• Both Flow Configuration and Transmitter Specific information.
Figure 6-37 identifies the contents for each type of file. An “X” in the
corresponding box indicates that the listed information will be
overwritten in the transmitter.
NOTE
When the Transmitter Specific Information is sent to a transmitter, all
previous transmitter information will be overwritten.
Transmitter Recv Config
This screen receives the configuration information from a transmitter.
Figure 6-37.
Send Config Screen.
To Next Page
Loading...
Need help?
General
