9
UTILITY OPERATION
9.2 C Controller Setting Utility
9.2.3 Operating Event history screen
9 - 17
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
* 1 "Event information" may not be able to display all event information. To confirm all data of the
event information, double-click the event to display the "Event detail information" screen, and
confirm the event information.
Table9.8 Explanation of Event history screen (Continued)
Item Description
Reference
section
Event history
Displays the history of up to 512 events that occurred in the C Controller
module.
If 513 or more events have occurred, the oldest data is deleted and a new
event is recorded.
The event history data are displayed in descending order of event
occurrence date and time (in reverse chronological order).
Double-clicking an event opens the "Event detail information" screen.
This section
(3),
18.4.2
Date Displays the date of the event that occurred. 18.4.2
Time Displays the time of the event that occurred. 18.4.2
Source
Displays the source of the event that occurred. (Example: "MQbfDrv" is
displayed when the event occurred in the bus interface drive (bus
section).)
18.4.2
Event No. Displays the event No. of the event that occurred. 18.4.2
Event information
*1
Displays the event information of the event that occurred. 18.4.2
Module information
Event history
SRAM monitor Module monitor Online operation
To Next Page
Loading...
Need help?
General
