9
UTILITY OPERATION
9.2 C Controller Setting Utility
9.2.8 Operating I/O assignment setting screen
9 - 47
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
(1) I/O assignment setting screen
* 1 Can be set only in a multiple CPU system configuration.
(To next page)
Figure 9.41 I/O assignment setting screen
Table9.25 Explanation of I/O assignment setting screen
Item Description
Reference
section
I/O
assign-
ment
Slot
Displays the "Slot No." of the mounted module, the stage No. of the base
unit mounted with the module, and the installation position on the base
unit.
6.6.2
Type
Specify the type of the mounted module.
In a multiple CPU system configuration, no error will be displayed even if
"CPU (Empty)" is set to the position not supported by the C Controller
module. Check for incorrect setting.
(Initial value: " " (Blank), Setting range: " " (Blank), "Empty", "Input", "Hi.
input", "Output", "I/O mix", "Intelli.", "Interrupt", "No. 1"
*1
, to "No. 4"
*1
,
"CPU (Empty)"
*1
)
6.6.2,
12.2.2
Model name Enter the model name of the mounted module. 6.6.2
Points
Specify the I/O points when changing the I/O points of each slot.
(Initial value: " " (Blank), Setting range: 0, 16, 32, 48, 64, 128, 256, 512,
1024)
6.6.2
Start XY Specify the I/O No. when changing the I/O No. of each slot. 6.6.2
button
Opens the "Switch setting for I/O and intelligent function module" screen.
This section
(2)
button
Opens the "Intelligent function module detailed setting" screen.
This section
(3)
System setting
I/O assignment setting
Multiple CPU setting Communication diagnostics
Switch setting
Detail setting
To Next Page
Loading...
Need help?
General
