9
UTILITY OPERATION
9.2 C Controller Setting Utility
9.2.8 Operating I/O assignment setting screen
9 - 49
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
(3) Intelligent function module detailed setting screen
Make the detailed setting of the I/O modules and intelligent function modules.
* 1 In a multiple CPU system configuration, the data set in this item must be identically set to each of
all CPUs.
* 2 The setting range changes depending on the "No. of CPU" set on the <<Multiple CPU setting>>
tab.
Figure 9.43 Intelligent function module detailed setting screen
Table9.27 Explanation of Intelligent function module detailed setting screen
Item Description
Reference
section
Slot, Type, Model name
Displays the "Slot", "Type", and "Model name" set on the "I/O assignment
setting" screen.
This section
(1)
Error time output mode
Select the output mode for error detection.
(Initial value: "Clear", Setting range: "Clear", "Hold")
4.10
H/W error time CPU operation
mode
Select the operation mode of the C Controller module for the time of
hardware error detection.
(Initial value: "Stop", Setting range: "Stop", "Continue")
4.11
I/O response time
Set the I/O response time.
4.9
Mounted module Initial value Setting range
Higt-speed input
module, interrupt
module
0.2 0.1, 0.2, 0.4, 0.6, 1
Input module, I/O
composite module
10 1, 5, 10, 20, 70
(Unit: ms)
Control CPU
*1
Set the control CPU.
(Initial value: "No. 1", Setting range: "No. 1" to "No. 4"
*2
)
15.1.5
button
Saves the settings and closes the "Intelligent function module detailed
setting" screen.
button
Closes the "Intelligent function module detailed setting" screen without
saving the settings.
End
Cancel
To Next Page
Loading...
Need help?
General
