9
UTILITY OPERATION
9.4 MELSECNET/H Utility
9.4.2 Operating Module information screen
9 - 91
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
(a) Communication status details
The following indicates the communication status details.
Table9.58 Communication status details
Display Description
In data link Data link is being performed.
Suspended data link (Other)
Cyclic transmission was stopped from the other
station.
Suspended data link (Self)
Cyclic transmission was stopped by the self
station.
Baton pass (No area)
There is no B/W transmission assignment to the
self station.
Baton pass (Parameter Halt) Any of the self station parameters has an error.
Baton pass (No receive) Common parameters have not been received.
Disconnecting (No baton)
Station numbers overlapping, or cable not
connected.
Disconnecting (Link error) Cable not connected.
In test Online/offline test is being conducted.
During reset Hardware fault.
To Next Page
Loading...
Need help?
General
