To Next Page

To Previous Page

13 - 19

13.4 Access Ranges between CPU Modules and Other Modules

13.4.2 Access to non-controlled modules

MULTIPLE CPU SYSTEM CONCEPT

2) Output (Y) data are loaded from the modules indicated in Table13.8 that are

mounted on the main base unit and extension base unit.

3) Outputs cannot be loaded from empty slots and remote stations on

MELSECNET/H, CC-Link, etc. controlled by another CPU.

When the ON/OFF output information to remote stations on MELSECNET/H,

CC-Link, etc. is to be used by the C Controller module, read the

programmable controller CPU devices using the MELSEC data link function.

(b) When "Not all CPUs can read all outputs" has been set

The ON/OFF data output from another CPU to output modules and intelligent

function modules cannot be loaded into the host CPU's output (Y) (remains at

OFF.)

Table13.8 Modules from which outputs can be loaded

Type setting on

<<I/O assignment setting>> tab

of C Controller setting utility

Mounted module

None

Output module

I/O composite module

Intelligent function module

Output

I/O mix

Output module

I/O composite module

Intelli. Intelligent function module

Mitsubishi MELSEC Q Series User Manual

Other manuals for Mitsubishi MELSEC Q Series