Polycom VVX 300 User Manual

Polycom VVX Business Media Phones User Guide UC Software 5.3.0
Polycom, Inc. 136
When you enable Do Not Disturb on your phone, you receive only Emergency broadcasts. Non-
emergency broadcasts do not display or play on your phone.
Receive PTT Broadcasts When Not in an Active Call
When you receive a broadcast and you are not in an active call, the broadcast immediately plays,
regardless of the broadcast priority.
When you adjust the volume of a non-emergency broadcast, your phone retains the adjusted volume for
all subsequent non-emergency broadcasts. However, only system administrators can adjust the volume
level of an Emergency broadcast.
Receive PTT Broadcasts during Active Calls
How you handle a broadcast when you are in an active call depends on the broadcast priority and if your
phone is set up to receive a broadcast when you are in an active call.
The following occurs when you receive a broadcast during an active call:
● When your phone is set up to receive Normal broadcasts during an active call, the broadcast
immediately plays. You hear both the active call and the broadcast.
● When your phone is not set up to receive broadcasts during active calls, the broadcast is displayed
as a Pending broadcast.
● When the broadcast is a Priority or Emergency broadcast, the broadcast immediately plays. You
hear the original call and the broadcast.
To listen a broadcast during a call:
» Do one of the following,
 For broadcasts that play automatically during a call, hold the call to hear only the broadcast.
 For Pending broadcasts, select Accept or hold the call.
Reply to PTT Broadcasts
When a broadcast ends, the broadcast enters a 10-second waiting period. During this period, the channel
remains open to receive or send additional broadcasts.
To reply to a PTT Broadcast:
1 During the 10-second waiting period, press and hold Talk
2 Begin talking.
The broadcast is sent to all people listening on the channel.
3 When you finish talking, release Talk.
The broadcast enters another waiting period until someone broadcasts again. If no activity occurs
within the waiting period, the channel closes and no more broadcasts can take place.
End PTT Broadcasts
After you end a broadcast, the channel remains open so others can respond.

Polycom VVX 300 Specifications

General

Unicode UTF-8 character support	Yes
Number of handles included	1 pc(s)
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Display resolution	208 x 104 pixels
Lines quantity	6 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Security algorithms	HTTPS, SRTP, SSL/TLS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	209.5 mm
Width	304.8 mm
Height	107.9 mm
Weight	900 g