Polycom VVX Business Media Phones User Guide UC Software 5.3.0
Polycom, Inc. 178
To connect the VVX Expansion Module to your phone:
» Connect an auxiliary cable from the AUX port on the phone to the AUX 1 port on the expansion
module.
The LED lights on the module’s line keys flash red and green as the module starts up. The VVX
Color Expansion Modules takes approximately 20 seconds to power up, and the VVX Expansion
Modules with a paper display take approximately three seconds to power up.
After the first module is on, you can connect up to two additional modules to your VVX phone.
To connect multiple VVX Expansion Modules:
1 Connect an auxiliary cable from the AUX 2 port on the first module connected to the phone to the
AUX 1 port on the second module.
2 Connect an auxiliary cable from the AUX 2 port on the second module to the AUX 1 port on the
third module.
The LED lights on the line keys light up for each connected module as the expansion modules start
up.
After you connect your expansion modules to your VVX phone, you can begin using your expansion
modules.
Use VVX Expansion Modules
This section includes the following topics on how to use the VVX Expansion Modules with your VVX
phone:
● View VVX Expansion Module Hardware Features
● Assign Busy Lamp Field Contacts, Microsoft Lync Contacts, and Favorites
● Generate the VVX Expansion Module Directory Card
● Navigate VVX Color Expansion Module Paging
● Change the Backlight
To Next Page
Loading...
Need help?
General
Weight and Dimensions
