Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
15
Fire due to incorrect operation of the motor
When incorrectly operated and in the case of a fault, the motor can overheat resulting in fire and smoke. This can result in
severe injury or death. Further, excessively high temperatures destroy motor components and result in increased failures
as well as shorter service lives of motors.
• Operate the motor according to the relevant specifications.
• Only operate the motors in conjunction with effective temperature monitoring.
•
Immediately switch off the motor if excessively high temperatures occur.
Burn injuries caused by hot surfaces
In operation, the motor can reach high temperatures, which can cause burns if touched.
• Mount the motor so that it is not accessible in operation.
Measures when maintenance is required:
• Allow the motor to cool down before starting any work.
•
Use the appropriate personnel protection equipment, e.g. gloves.
Equipment damage due to electric fields or electrostatic discharge
Electrostatic sensitive devices (ESD) are individual components, integrated circuits, modules or devices that may be
damaged by either electric fields or electrostatic discharge.
Equipment damage due to electric fields or electrostatic discharge
Electric fields or electrostatic discharge can cause malfunctions through damaged individual components,
integrated circuits, modules or devices.
• Only pack, store, transport and send electronic components, modules or devices in their original packaging
or in other suitable materials, e.g conductive foam rubber of aluminum foil.
• Only touch components, modules and devices when you are grounded by one of the following methods:
– Wearing an ESD wrist strap
– Wearing ESD shoes or ESD grounding straps in ESD areas with conductive flooring
• Only place electronic components, modules or devices on conductive surfaces (table with ESD surface,
conductive ESD foam, ESD packaging, ESD transport container).
Warranty and liability for application examples
Application examples are not binding and do not claim to be complete regarding configuration, equipment or any eventuality
which may arise. Application examples do not represent specific customer solutions, but are only intended to provide
support for typical tasks.
As the user you yourself are responsible for ensuring that the products described are operated correctly. Application
examples do not relieve you of your responsibility for safe handling when using, installing, operating and maintaining the
equipment.
To Next Page
Loading...
Need help?
General
