Siemens SINUMERIK 808D ADVANCED Series User Manual

Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
183
6.7.2
Renaming the default program
PLC Programming Tool contains a default PLC program. You can give this program a new name by performing the following
operations:
1.
Start the software by
double-clicking the icon on your desktop.
2.
Click the
button in the toolbar or select from the main window menu as follows to select
and open the default PLC
program from the Toolbox:
3.
Select the following menu command to save this file under a new name to a desired folder so
that the default program will not be o
verwritten:

Siemens SINUMERIK 808D ADVANCED Series Specifications

General

Control Type	Digital
Minimum programmable increment	0.001 mm
Axis Control	Digital servo control
PLC	Integrated PLC
Power Supply	24 V DC
Operating Temperature	0 to 50 °C
Control Unit Type	CNC Control Unit
Connectivity	USB, Ethernet
User Interface	SINUMERIK Operate
Spindle Control	Digital drive interface
Protection Class	IP20
Storage Temperature	-20 to 70 °C
Humidity	5% to 95% (non-condensing)
Key Panel	Membrane key panel