Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
167
T_cw BOOL Turret CW rotation output
Turret CCW rotation output
Magent BOOL Solenoid for clamping
Display for tool changing
Error1: turret motor overload
Error2: programmed tool no. > max tool no.
Error3: max tool no. setting error
Error4: not able to find pre-indexing signal in expected time
Error5: not able to lock in expected time
Assigned global variables
Current tool (retentive data)
Position marking for turret CW rotation
Position marking for turret CCW rotation
Monitoring the tool change buffer zone in JOG mode
Direction of adjacent tool change
Turret tool positioning finished
Relevant PLC machine data
Max. tool number (4 or 6)
Monitoring time for tool searching
Activating the turret function of a turning machine
14512 [21].1 - Switch of the I/O interface (0: set I0.0 to I2.7/Q0.0 to Q1.7 as the standard I/O wiring in
the default PLC; 1: set I6.0 to I8.7/Q4.0 to Q5.7 as the standard I/O wiring in the de-
Example for calling subroutine 52
To Next Page
Loading...
Need help?
General
