Commissioning Manual
478 6FC5397-4EP10-0BA8, 07/2018
Set the behavior of the control system when it receives a remote access request.
Specify the duration of the following dialog box displaying on the HMI:
The following operations on the HMI are possible when this dialog box appears:
Press this softkey to reject the request.
ermit the request.
Use the following key to select the automatic response for the control system after the
above dialog box disappears with no softkey operations.
Press this softkey to save the settings.
Starting/stopping remote control
Proceed through the following steps to start/stop the remote control of the HMI:
tool and establish an Ethernet connection to the control system (see section
"Connecting with AMM (Page 47)").
button in the toolbar or select from the main window menu as follows to start the re-
Once the remote control has been started, a monitoring window opens showing the HMI screen
contents of the connected control system. You can find a
symbol in the tip area of the HMI
To Next Page
Loading...
Need help?
General
