Sony MVS -8000X - Page 276

Chapter 4 Keys
276
Resizer
This enables the resizer function.
2 Press [Border/Crop].
The Border/Crop menu appears.
3 Press [Border], turning it on.
This enables the adjustment of crop.
4 Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
•SD format
•HD format
To apply color to a border
1 In the <Border Mode> group of the Border/Crop menu, press [Flat Color].
2 Adjust the following parameters.
Knob Parameter Adjustment Setting Values
1 H Simultaneously adjust width of left
and right borders
0.00 to 4.00
2 V Simultaneously adjust width of top
and bottom borders
0.00 to 3.00 (4:3)
0.00 to 2.25 (16:9)
3 All Simultaneously adjust width of all
four borders
Value of H shown
5 Density Density of the borders 0.00 to 100.00
Knob Parameter Adjustment Setting Values
1 H Simultaneously adjust width of left
and right borders
0.00 to 12.00 (4:3)
0.00 to 16.00 (16:9)
2 V Simultaneously adjust width of top
and bottom borders
0.00 to 9.00
3 All Simultaneously adjust width of all
four borders
Value of H shown
5 Density Density of the borders 0.00 to 100.00
Knob Parameter Adjustment Setting Values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00