Chapter 9 Color Corrector
469
Color Corrector Functions
Applying output video processing effects
1
In the CCR menu, press VF1 ‘CCR1’ and HF6 ‘Spot CCR/Output.’
The Spot CCR/Output menu appears.
2
In the <Output Process> group, press [Output Process], turning it on.
3
Adjust the following parameters.
To return the parameters to their default settings
In the <Output Process> group, press [Unity].
YUV Clip Operations
For each of the luminance and color difference signals, the following
processing is available.
White clip: setting the maximum level of the luminance signal.
Dark clip: setting the minimum level of the luminance signal.
Positive clip: setting the maximum amplitude in the positive direction of the
color difference signal.
Negative clip: setting the maximum amplitude in the negative direction of the
color difference signal.
Applying YUV clip processing
1
In the CCR menu, press VF1 ‘CCR1’ and HF7 ‘YUV Clip/RGB Clip.’
The YUV Clip/RGB Clip menu appears.
2
In the <YUV Clip> group, press [YUV Clip], turning it on.
3
In the <YUV Clip Adjust> group, select the target for adjustment.
Luminance: settings for the luminance signal.
Chroma: settings for the color difference signal.
Knob Parameter Adjustment Setting values
1 Video Gain Video signal gain –200.00 to +200.00
2 Y Gain Y signal gain –200.00 to +200.00
3 C Gain Chrominance signal gain –200.00 to +200.00
4 Hue Delay Hue delay –180.00 to +180.00
5 Black Level Black level –116.90 to +116.90
To Next Page
Loading...
Need help?
General