Chapter 11 DME Operations
619
DME Special Effect Operations
• When Soft is selected
• When Soft Border is selected
Selecting the signal or color to be inserted in the wipe crop
border
When you are applying a border or soft border to the wipe crop, you can select
the signal or color to be inserted in the border.
1
In the <Border Fill> group of the Wipe Crop menu, select one of the
following.
Flat Color: flat color
Mix Color: a mix color signal combining color 1 and color 2 (see the next
section, “Color Mix Settings”)
Ext Video: an external video signal input to the Ext IN connector
2
When Flat Color is selected in step 1 only, adjust the following parameters.
Color Mix Settings
Notes
The color mix function is not supported on the MVE-8000A.
Knob Parameter Adjustment Setting values
1 Soft Edge softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Width Border width 0.00 to 100.00
2 Inner Soft Border inner softness 0.00 to 100.00
3 Outer Soft Border outer softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
Need help?
General