Chapter 9 Color Corrector
458
Color Corrector Functions
Color Corrector Functions
This section describes the color corrector functions.
For each of the following operations, it is possible to copy or swap data
between two color correctors (CCR1 and CCR2).
Input Video Processing Operations
Carry out the following corrections to a YUV signal before conversion to an
RGB signal.
• Overall gain adjustment of the video signal
• Gain adjustment of the Y signal
• Gain adjustment of the C signal
•Hue delay
• Black level adjustment
To apply input video processing effects, use the following procedure.
1
In the CCR menu, press VF1 ‘CCR1’ and HF1 ‘Input Process.’
The Input Process menu appears.
2
In the <Input Process> group, press [Input Process], turning it on.
3
Adjust the following parameters.
To return the parameters to their default settings
Press [Unity] in the <Input Process> group.
Knob Parameter Adjustment Setting values
1 Video Gain Video signal gain –200.00 to +200.00
2 Y Gain Y signal gain –200.00 to +200.00
3 C Gain Chrominance signal gain –200.00 to +200.00
4 Hue Delay Hue delay –180.00 to +180.00
5 Black Level Black level –116.90 to +116.90
To Next Page
Loading...
Need help?
General