Chapter 5 Wipes
327
Wipe Snapshots
2
Press the memory recall button for the register from which you want to
recall the wipe snapshot.
The button lights, and the saved wipe snapshot is recalled. At this point,
the numeric display shows the pattern number or register name.
Canceling the recall of a wipe snapshot
To cancel the recall of a wipe snapshot, press the [UNDO] button.
Deleting a wipe snapshot
When the [WIPE] button is lit in the Flexi Pad control block, hold down the
[STORE STATS] button and press the memory recall button for the register in
which you want to delete the wipe snapshot.
The indication of the memory recall button reverts from the wipe pattern or
register name to the register number.
Notes
In a simple type Flexi Pad control block, it is not possible to delete a wipe
snapshot.
Wipe Snapshot Operations With the Menus
Menus used
As an example, when operating on M/E-1, select M/E-1 >Wipe >Wipe
Snapshot.
The Wipe Snapshot menu appears.
To Next Page
Loading...
Need help?
General