Chapter 1 MVS-8000X Functions
47
Setup
Setup
Various settings are required, in order to operate the switcher, control panel,
DME, external devices, and so on, connected together in a single system.
This is referred to as “setup,” and you can carry out the setup operations from
the Engineering Setup menu.
The settings in the Engineering Setup menu are grouped under the following
headings.
System setup (System)
For details, see Chapter 18 “System Setup” (Volume 3).
Panel setup (Panel)
For details, see Chapter 19 “Control Panel Setup (Panel)” (Volume 3).
Switcher setup (Switcher)
For details, see Chapter 20 “Switcher Setup (Switcher)” (Volume 3).
DME setup (DME)
For details, see Chapter 21 “DME Setup (DME)” (Volume 3).
DCU setup (DCU)
For details, see Chapter 22 “DCU Setup (DCU)” (Volume 3).
Router/tally setup (Router/Tally)
For details, see Chapter 23 “Setup Relating to Router Interface and Tally
(Router/Tally)” (Volume 3).
To Next Page
Loading...
Need help?
General