Chapter 7 Frame Memory
383
Still Image Operations
Still Image Operations
The frame memory functions provides the following still image file functions.
• Freezing an input image
• Saving a still image
• Recalling a still image
• Processing an image
• Continuously capturing images (record)
• Recalling a continuous sequence of images (animation)
For an overview of frame memory concepts, see “Overview” (page 380).
Notes
During playback of a frame memory clip of the pair assigned to either of the
target FM selection buttons (see page 405), frame memory operations may not
be performed properly. Carry out frame memory operations after stopping clip
playback.
Preparations
Allocating the frame memory outputs (FM1 to FM8) to cross-
point buttons
To output a frame memory image to a monitor, for example, the output signal
from the frame memory (FM1 to FM8) must be allocated to a cross-point
button. Carry out this allocation in the Setup menu.
Notes
When the signal format is 1080P, only the four options of FM1 to FM4 can be
used.
Accessing the Frame Memory menu
Most frame memory operations are carried out using the Frame Memory menu.
To access the Frame Memory menu, use either of the following procedures.
• In the menu control block, select the top menu selection button [FRAME
MEM].
• Press the cross-point button to which the frame memory output is allocated
twice in rapid succession.
To Next Page
Loading...
Need help?
General