Chapter 11 DME Operations
624
DME Special Effect Operations
The Multi Move effect is enabled. You can adjust the center point of
shrinking, the ratio of shrinking, and the aspect ratio of the shrunken
images with the knobs.
3
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
•4:3 mode
a) Specify minus values to stretch the image in the vertical direction, and plus values to
stretch the image in the horizontal direction.
• 16:9 mode
a) Specify minus values to stretch the image in the vertical direction, and plus values to
stretch the image in the horizontal direction.
Sepia Settings
Applying the Sepia effect
1
In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2
Press [Sepia], turning it on.
Knob Parameter Adjustment Setting values
1 Center X x-value of shrinking center point –4.00 to +4.00 (SD)
–12.00 to +12.00 (HD)
2 Center Y y-value of shrinking center point –3.00 to +3.00 (SD)
–9.00 to +9.00 (HD)
3 Size Shrinking ratio 0.00 to 100.00
4 Aspect Aspect ratio of shrunken images
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Center X x-value of shrinking center point –4.00 to +4.00 (SD)
–16.00 to +16.00 (HD)
2 Center Y y-value of shrinking center point –2.25 to +2.25(SD)
–9.00 to +9.00 (HD)
3 Size Shrinking ratio 0.00 to 100.00
4 Aspect Aspect ratio of shrunken images
–100.00 to +100.00
a)
To Next Page
Loading...
Need help?
General