Chapter 11 DME Operations
625
DME Special Effect Operations
The Sepia effect is enabled. You can adjust the degree of mixing between
the sepia image and the original image with the knobs.
3
Set the following parameters.
4
To set the color of the sepia image, press [Sepia Color], turning it on, and
adjust the parameters.
Masking the Sepia effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 634).
Mono Settings
Applying the Mono effect
1
In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2
Press [Mono], turning it on.
The Mono effect is enabled. The color image changes to monochrome.
Masking the Mono effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 634).
Knob Parameter Adjustment Setting values
1 Mix Y Y signal mix amount 0.00 to 100.00
2 Mix C Chroma signal mix amount 0.00 to 100.00
3 Mix All Y signal and chroma signal mix
amount
Mix Y value shown
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
Need help?
General