Sony MVS -8000X User Manual

Chapter 2 Menus and Control Panel
63
Names and Functions of Parts of the Control Panel
an independent key transition can be
set in the numeric keypad control
block, in the Flexi Pad control block, or
in a menu.
For details of assignment of keys 5 to 8, see
“Assigning Buttons for Selection of Keys 5
to 8 in the Setup Menu” (page 544) in
Appendix (Volume 1).
m Key source name display/key
snapshot buttons
These display the source name selected on
the corresponding keyer. In key snapshot
mode, press these buttons, corresponding to
registers 1 to 8 for the selected keyer, to
save or recall a key snapshot.
n Key snapshot setting buttons
K-SS (key snapshot): This enables key
snapshot mode.
K-SS STORE (key snapshot store): To
save a key snapshot, hold down this
button, and press the key source name
display/key snapshot button
corresponding to the register you want
to save.
K-MOD ENBL (key modifier enable): To
recall key adjustment values and key
modifier settings when recalling a key
snapshot, press this button, turning it
on.
K-TR ENBL (key transition enable): To
recall independent key transition
settings when recalling a key snapshot,
press this button, turning it on.
Flexi Pad Control Block (Standard Type)
The Flexi Pad control block is used for
saving and recalling wipe snapshots, DME
wipe snapshots, and snapshots, for recalling
effects, and shotbox content, and for
entering the transition rate.

Sony MVS -8000X Specifications

General

Brand	Sony
Model	MVS -8000X
Category	Switch
Language	English