Sony MVS -8000X User Manual

Chapter 13 Keyframe Effects
801
Specifying the Region and Edit Points
To enter a difference value
When moving to a point specified with the [GO TO KF] button or [GO TO TC]
button, you can also enter the difference from the current keyframe number or
timecode value.
Press the numeric keypad [+/–] button, and enter the difference, then press the
[TRIM] button. Each time you press the [+/–] button, it toggles between plus
(+) and minus (–).
Notes
You can also specify edit points in the Multifunction Flexi Pad control block.
For details of the operation, see “Keyframe Creation and Editing in the
Multifunction Flexi Pad Control Block” (page 814).

Sony MVS -8000X Specifications

General

Keyers per M/E	Up to 4 keyers per M/E
Audio Channels	16 channels
Frame Rate	Up to 60p
Resolution	4K/UHD
Control Interface	Ethernet
Video Format	SD, HD, 4K
Mix Effects (M/E) Buses	Up to 8 M/E
Power Supply	AC 100 V to 240 V, 50/60 Hz