Yamaha F6AMH Service Manual

POWER UNIT
POWER UNIT
CHECKING THE ENGINE OIL LEVEL
Check:
 Engine oil level
(At engine stopped)
Above
a
 Check if there is any
fuel or water mixed with the engine
oil. If no abnormality is found, drain
the oil until the level is between
a
and
b
.
Below
b
 Add engine oil so that
the level is between
a
and
b
.
REPLACING THE ENGINE OIL
1. Remove:
 Oil filler cap 1
 Drain plug 2
2. Install:
 Drain plug 2
3. Fill:
 Engine oil 3
(into the crank case)
4. Install:
 Oil filler cap 1
5. Check:
 Engine oil level
Refer to “CHECKING THE ENGINE
OIL LEVEL”
NOTE:
 Run the engine for several minutes, turn
it off, and check the oil level.
 If the engine oil is still not at proper level,
add/drain as needed.
Drain plug:
24 N
 m (2.4 kgf  m, 17.8 ft  lb)
Recommended engine oil:
4-stroke engine oil
API: SE, SF, SG or SH
SAE: 10W-30, 10W-40
Oil quantity:
800cm
3
(27.0 US oz, 28.2 lmp oz)
3-14

Yamaha F6AMH Specifications

General

Brand	Yamaha
Model	F6AMH
Category	Outboard Motor
Language	English