Dräger Apollo User Manual

Alarms
188 Instructions for Use Apollo SW 4.5n
Part Number: 9053586, 3rd edition
Suppressing alarms
Silencing audible alarms
Figure 114. Alarm IndicationsThe audible alarms can be silenced for 2 minutes.
To silence all audible alarms:
– Press the > < key on the side of the monitor
screen (1 in Figure 114).
The yellow LED on the key lights up, and the
symbol > < appears on a yellow background in
the system information field next to the date with
an indication of the silence time remaining
(mm:ss) (2 in Figure 114).
To enable the audible alarms again:
– Press the > > again.
The yellow LED on the key turns off, the
indication is removed from the system
information field, and all audible alarms are
enabled.
Disabling alarms
Figure 115. Disabling alarms
Audio and visual alarms can be disabled by adjusting
the default alarm limits in the standby configuration
screen. Certain alarms can also be disabled
automatically, based on ventilation mode. See the
chapter “Configuration” for complete information.
12
1 2
CAUTION!
Risk of inadequate monitoring
National standards require a minimum monitoring
with some alarm functions. These standards may
not be met if the alarm function of the etCO
2
monitoring parameter is disabled.
Only disable this monitoring parameter after
consulting national standards.
CAUTION!
Risk of inadequate monitoring
National standards require a minimum monitoring
with some alarm functions. These standards may
not be met if the alarm function of the SpO
2
monitoring parameter is disabled.
Only disable this monitoring parameter after
consulting national standards.

Dräger Apollo Specifications

General

Brand	Dräger
Model	Apollo
Category	Medical Equipment
Language	English