Dräger Apollo User Manual

System Setup
76 Instructions for Use Apollo SW 4.5n
Part Number: 9053586, 3rd edition
Connecting the patient system
Note: Apollo (without accessories) is not made with
natural rubber latex. To minimize the risk of
exposure to latex, use latex-free breathing
bags and breathing hoses.
Note: Only use original sample line - other lines may
change the technical data for the device.
Note: For sample lines available for use with the
Apollo, see the list of accessories.
WARNING!
Risk of infection
Unpackaged or non-reprocessed components
might be contaminated with pathogenic germs.
– To prevent cross-infection of patients or
users, use only new or reprocessed
components.
– Observe reprocessing instructions and
assembly instructions.
WARNING!
Risk of burns
Conductive breathing hoses or face masks may
cause burns during HF surgery.
Do not use these types of hoses and masks in
combination with HF surgery.
WARNING!
Risk due to particles and dust
To protect the patient from particles and dust, a
filter must be used between the inspiratory limb
of the breathing system and the patient.
Use a Y-piece filter or filter on the inspiratory
port.
CAUTION!
Risk of inadequate gas concentrations
If the patient system components are not tightly
connected, ambient air will be added to the gas
mixture.
Make sure that all patient system components are
tightly connected.

Dräger Apollo Specifications

General

Brand	Dräger
Model	Apollo
Category	Medical Equipment
Language	English