Features List
137
[Annotations]
This feature allows you to add a comment, date, and page numbers onto copies.
You can select a comment, date, and page numbers, and their print positions from preset
formats.
The setting in [Reduce / Enlarge] does not affect the annotation image and text sizes.
When [Pages per Side] is set, an annotation is added to the combined image.
When [Repeat Image] or [Booklet Creation] is set, an annotation is added to each copy image.
If a layout template is specified in [Apply Layout Template to Copy / Print Jobs] under [Force Annotation] in
the System Administration mode, the comment, date, and page number specified here are overlapped with
the text on the layout template when printed. For information on [Force Annotation], refer to "[Force
Annotation]" (P.258).
[Watermark]
This feature allows you to faintly print a sequential control number in the background of
each copy page.
If you set "1" as the starting number, "1" is printed on each page of the first copy set and "2"
is printed on each page of the second set.
To prevent, for instance, the duplication of confidential documents that are to be
distributed at a conference, you can use this feature to add sequential numbers to the
copies, and associate the numbers with the conference members.
If a layout template is specified in [Apply Layout Template to Copy / Print Jobs] under [Force Annotation] in
the System Administration mode, the watermark specified here is overlapped with the text on the layout
template when printed. For information on [Force Annotation], refer to "[Force Annotation]" (P.258).
When [Force Watermark-Copy] is set to [On], [Watermark] is fixed to [On], which cannot be changed. For
more information on Watermark, refer to "[Watermark]" (P.256).
[Preset Repeat Image]
This feature allows you to repeatedly copy one original onto equally divided areas
according to the specified number of copies.
You can select the number of the times the original is copied onto one sheet from [2 Times],
[4 Times], or [8 Times].
When you select an option other than [Auto %] in [Reduce / Enlarge], image loss may occur depending on
the image size of the original.
[Build Job]
This feature allows you to apply different copy settings to each page or each stack, and
then output the copies as one job.
[Sample Job]
When making multiple sets of copies, you can print a sample set to check the finished
output and then print the remaining copy sets. You can select whether to continue or cancel
To Next Page
Loading...
Need help?
General
