Fuji Xerox ApeosPort-VII C4421 User Manual

18 Installing/Removing Optional Components
464
Installing the Storage
Important

Once installed, the storage (optional) is exclusive to the device to prevent data leaks. It cannot be removed
and attached to another device.
1 Press the power button and select [Power Off Device] to switch off the power.

When using ApeosPort-VII C4421

When using ApeosPort-VII C3321
Important

The electrical components inside the back cover of the device may be hot. When installing, be sure to turn off
the power, and after about 40 minutes, make sure that the inside of the device has cooled down.
2 Slide the latch on the rear left side in the direction of the arrow and lift it towards you.

Fuji Xerox ApeosPort-VII C4421 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C4421
Category	Printer
Language	English