Importing Scanned Data
177
Importing Scanned Data
This section describes how to import files from a device's folder to your computer.
Importing with a TWAIN Compatible Application
Network Scanner Driver is used to import stored files.
To use Network Scanner Driver, you must have Network Scanner Utility 3 installed on your
computer.
You can find Network Scanner Utility 3 in the provided “Software/Product Manual” disc.
To save scanned files in TIFF format, you need to install TIFF Viewer contained in the provided “Software/
Product Manual” disc.
TIFF Viewer is a software to display and print TIFF files based on TIFF 6.0 and TIFF-FX images based on
Internet fax specifications.
To import files stored in a folder, prior settings are required, such as enabling ports. For more information,
refer to "Configuration of Scan to Folder" (P.55). For information on the operation of the application, refer to
the documentation provided with the application.
For information on how to install Network Scanner Utility 3 and TIFF Viewer, refer to the Media Information
included in the provided “Software/Product Manual” disc.
To learn about fields in the displayed dialog box, click [Help] to view the Network Scanner Driver's help.
1
Launch application software to which files are imported.
The application must support TWAIN.
2
From the [File] menu, select the command for selecting the scanner (source).
3
Select [FX Network Scanner 3 TWAIN], and click [Select].
4
From the [File] menu, select the command for importing the image from the scanner.
5
From the displayed list, click the scanner name of the device, and click [Next].
If no scanners are shown in the list, click [Search Again]. The application searches for scanners.
To change the display of scanner names, use the dialog box that appears by clicking [Search/Display
Settings]. For more information, refer to "Changing the display of scanner names" (P.178).
Only scanners on the network are automatically listed. To view a scanner on another network, click [Search/
Display Settings], and register the IP Address and scanner name. For information on how to register a
scanner, refer to "Changing the display of scanner names" (P.178).
6
In the [Folder Number] field, enter the number of the folder that contains the file to be
imported. In the [Passcode] field, enter a passcode.
You can also select a folder number from [Registered Folders].
Clicking [Select Scanner] returns to step 5, where you can reselect a scanner.
7
Click [Confirm].
To Next Page
Loading...
Need help?
General
