Fuji Xerox ApeosPort-VII C4421 User Manual

13 Advanced Settings
308
 When receiving Emails via POP3
Enter the POP3 user name (on the left side of @) and incoming POP3 mail server name in
the address section (on the right side of @). You can set an alias, such as
mymail@example.com.
Example: mymail@myhost.example.com

Account name: mymail
[Device Name]
Enter the device name with up to 32 characters.
[Host Name]
Enter the host name with up to 32 single-byte characters.
Important

When you use SMB, enter the first 15 letters of the host name. The host name must be up to 15 single-byte
characters to identify the device properly.
[Domain Name]
Enter the domain name with up to 64 characters.
[Proxy Server List]
Configure a proxy server when using inbound/outbound access.
Important

Do not set this item unless you use services requiring proxy server settings.
[Proxy Server Settings] / [Proxy Server Settings - Ethernet 1], [Proxy Server Settings - Wi-Fi]
You can configure the proxy server settings for Ethernet 1, Ethernet 2, and Wi-Fi, depending
on your network environment.
Note

This setting also applies to the connection to the SFTP server.
 [Use Proxy Server]
Select whether or not to use a proxy server.
 [Proxy Server Setup]
Set how to specify the proxy server.
 [Enter URL to Configuration Script]
Specify the URL when [Proxy Server Setup] is set to [Use Automatic Proxy Configuration
Script].
 [Addresses to Bypass Proxy Server]
Enter addresses not using the proxy server. You can specify the addresses by IPv4 address,
IPv6 address, and FQDN. You can use wildcards "*" for specifying the addresses.
 [HTTP Proxy Server Name]
Enter the server name or IP address of the HTTP proxy server. You can specify the addresses
by IPv4 address, IPv6 address, and FQDN.

Fuji Xerox ApeosPort-VII C4421 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C4421
Category	Printer
Language	English