Fuji Xerox ApeosPort-VII C4421 User Manual

Installing A4 FAX LOW KIT
467
Installing A4 FAX LOW KIT
1 Press the power button and select [Power Off Device] to switch off the power.
Make sure that the display on the control panel and all the lights are turned off, then
disconnect the power cord from the power outlet and the device.

When using ApeosPort-VII C4421

When using ApeosPort-VII C3321
Important

The electrical components inside the back cover of the device may be hot. When installing, be sure to turn off
the power, and after about 40 minutes, make sure that the inside of the device has cooled down.
2 Slide the latch on the rear left side in the direction of the arrow and lift it towards you.

Fuji Xerox ApeosPort-VII C4421 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C4421
Category	Printer
Language	English