Fuji Xerox ApeosPort-VII C4421 User Manual

Features List
151
[Reduce / Enlarge]
This feature enlarges or reduces scanned images with a specified ratio.
You can select a preset ratio or specify a value.
Important

Some destination devices may not be able to receive faxes at the specified ratio.
Note

If a magnification is specified in [Reduce/Enlarge], [Rotate 90 degrees] does not function.
[Confirmation Options]
You can check fax and Internet Fax transmission results.
To receive fax transmission results, enabling [Confirmation Options] automatically prints a
Transmission Report when fax transmission completes successfully, and prints a
Transmission Report - Job Undelivered when fax transmission ends unsuccessfully.
To confirm Internet Fax transmission results, the following two types are available: [Read
Receipts] and [Delivery Receipts]. Selecting [Delivery Receipts] allows you to check whether
or not the Internet Fax you sent was delivered successfully to the recipient’s folder.
Selecting [Read Receipts] allows you to check whether or not the Internet Fax you sent was
correctly delivered and the attached files were correctly processed.
[Read Receipts]
Specify whether to use the Read Receipts feature. This feature allows you to check whether
the Internet Fax you sent was correctly processed.
Note

Read Receipts (MDN) and Delivery Receipts (DSN) are available when the recipient’s device supports MDN
and DSN, respectively.

You can select either [Read Receipts] or [Delivery Receipts] in the System Administration mode. For more
information, refer to "[Delivery Confirmation Method]" (P.292).
[Delivery Receipts]
Specify whether to use the Delivery Receipts feature. This feature allows you to check
whether the Internet Fax you sent was delivered successfully to the recipient's folder.
Note

You can select either [Read Receipts] or [Delivery Receipts] in the System Administration mode. For more
information, refer to "[Delivery Confirmation Method]" (P.292).

You can only use the Delivery Receipts (DSN) feature to check the delivery of email to servers that support
this feature. Furthermore, if any of the email servers on the transmission route do not support DSN, you
cannot verify the delivery of the email, even if the email has been delivered successfully. For this reason, the
result of the Delivery Receipts may differ from the actual delivery status.
[Starting Rate]
You can select a communication mode based on the features of the remote device.
 [G3 Auto]
Select this mode if the remote device is G3 compatible. This mode is normally selected.
Depending on the reception capabilities of the remote device, the device automatically
switches modes in the following order: G3 Unique ECM  G3 Unique  ITU-T G3 ECM 
ITU-T G3.

Fuji Xerox ApeosPort-VII C4421 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C4421
Category	Printer
Language	English