13 Advanced Settings
292
[Profile for Broadcast Job]
Set the default value for an Internet fax profile when performing an Internet fax broadcast
send.
A profile is specified to restrict attribute information such as image resolution and paper
size for transmissions between Internet Fax-enabled devices.
The supported TIFF-file profiles vary depending on the destination Internet Fax-enabled device. Before
specifying a profile, check the profile that the destination device supports.
[TIFF-S]
For documents larger than A4, the size is automatically reduced to A4 when transmission.
[TIFF-F]
Select this profile when you specify [Superfine (600 dpi)] for [Resolution].
[TIFF-J]
Select this profile for sending documents in JBIG.
[Delivery Confirmation Method]
Set the default value for the method of confirming that an Internet fax sent has arrived or
not.
To print a transmission result, set [Print Delivery Confirmation Mail] to [On] under [Email
Control].
You can select [Delivery Receipts] when the destination device supports the DSN feature. You can use [Read
Receipts] when the destination device supports the MDN feature.
[Delivery Receipts]
You can confirm whether the Internet fax you sent is delivered to the recipient's folder
successfully.
[Read Receipts]
You can confirm whether the Internet fax including attachments you sent is processed
properly at the recipient.
[Internet Fax Print Options]
When an email sent from an Internet fax compatible device to the email address of the
device is received, you can select the print operation.
[Restrict Fax Transfer to Address Book]
Restricts forwarding of emails sent by Internet fax in SMTP format to recipients registered
on the Address Book.
[Transmission Header Text - Fax Transfer]
When forwarding received email from Internet fax to fax, select whether or not to add a
Transmission Header Text (start time, Fax Name, recipient name, G3 ID, and number of
pages).
[Fax Transfer Maximum Data Size]
When forwarding a received email from Internet fax to fax, set the maximum data size.