13 Advanced Settings
280
[Scan to Folder Settings]
[Screen Defaults]
Changes the preset of buttons prepared for [Reduce / Enlarge] on the feature list.
Select the setting value to assign to the buttons from ones registered with [Reduce /
Enlarge Presets].
For how to set [Reduce / Enlarge Presets], refer to "[Reduce / Enlarge Presets]" (P.280).
[Original Size Defaults]
Set the document size displayed in [Original Size]. You can assign a document size to each
button other than [Auto Detect].
If you frequently use non-standard size paper for scanning, assigning the paper sizes to the
buttons will save your time to specify the size each time.
[Output Size Defaults]
Set the sizes to display when selecting [Auto %] for scanning documents at [Reduce /
Enlarge].
You can assign any output size to output size buttons.
Assigning the output sizes to the buttons will save your time to specify the size each time.
[Reduce / Enlarge Presets]
Set the magnifications displayed as [Proportional %] under [Reduce / Enlarge].
You can assign any magnification to the Reduce/Enlarge Preset buttons other than
[100%].
[Other Settings]
Set other settings for the Scan to Folder feature.
For details of the displayed items, refer to "[Other Settings]" (P.277) of [Scan Settings].
[Email Settings]
For information on scanner environment settings, refer to "Scanner Environment Settings" (P.55).
[Screen Defaults]
Changes the preset of buttons prepared for [Reduce / Enlarge] on the feature list.
Select the setting value to assign to the buttons from ones registered with [Reduce /
Enlarge Presets].
For how to set [Reduce / Enlarge Presets], refer to "[Reduce / Enlarge Presets]" (P.281).
[Original Size Defaults]
Set the document size displayed in [Original Size]. You can assign a document size to each
button other than [Auto Detect].
If you frequently use non-standard size paper for scanning, assigning the paper sizes to the
buttons will save your time to specify the size each time.
To Next Page
Loading...
Need help?
General
