Fuji Xerox ApeosPort-VII C4421 User Manual

Loading Originals
99
Loading Originals
The following methods are available to load originals:

Document Feeder
Single sheet
Multiple sheets

Document Glass
Single sheet
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet originals with sizes from 139.7 x
139.7 mm (Standard size: A5, A5 ) to 215.9 × 355.6 mm (Standard size: A4 or 8.5 × 14"
(Legal)).
If you use ApeosPort-VII C4421, the document feeder automatically detects standard size
originals.
Important

To avoid paper jams, use the document glass for originals with creases or strong wrinkles, cut-and-pasted
originals, curled paper, or back carbon paper.

2-sided scanning of lightweight paper (38 - 59 gsm) is not supported.
Note

For the fax services, the maximum supported size for the original document is 215.9 × 405.6 mm.

For ApeosPort-VII C4421, originals in different length can be loaded together. Load the original by aligning
both ends of the paper.

The standard sizes of originals that can be detected automatically depend on [Paper Size Settings] in the
system administration mode.
1 Remove any paper clips and staples before loading an original.
2 Adjust the document guides to match the size of the original loaded.

ApeosPort-VII C4421

ApeosPort-VII C3321

Fuji Xerox ApeosPort-VII C4421 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C4421
Category	Printer
Language	English