GE Voluson P8 Service Manual

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 3 - Setup Instructions 3-67
3-11-2 Wireless Network Configuration
1.) Connect the Wireless Network adapter as described in Section 3-5-5 on page 3-18.
2.) Press the UTILITIES
key on the control panel and select SYSTEM SETUP to invoke setup desktop.
3.) On the left side of the screen select CONNECTIVITY
and then click the DEVICE SETUP tab.
4.) Click the WLAN CONFIGURATION
button.
NOTICE
!! NOTICE:
To configure the Voluson® P8 / Voluson® P6 ultrasound unit to work with WLAN, the hospital’s
network administrator has to provide the required information.
Figure 3-62 WLAN Configuration button
[WLAN Configuration]
button

GE Voluson P8 Specifications

General

Category	Ultrasound System
Probe Ports	3 active probe ports
DICOM	Yes
Power Requirements	100-240 VAC, 50/60 Hz
Applications	Obstetrics, Gynecology
Imaging Modes	Color Doppler, Power Doppler
Connectivity	Ethernet, USB
Operating System	Windows-based