GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5-45
Section 5-11
Service Platform
5-11-1 Introduction
The Service Platform will increase service productivity and reduce training and service costs.
5-11-2 Access / Security
The Service Platform has different access and security user levels.
Each user is only granted access to the tools that are authorized for their use.
• Local Access: via System Setup - Administration -
SERVICE page
• Local(Extended) Access: A Service Dongle and the ”Standard GE Revolving” password (password
changes every six months) is necessary for use by GE Service when performing proprietary level
diagnostics on the Voluson® P8 / Voluson® P6 ultrasound system.
• Remote Access: This offers GE technicians the possibility to view the entire customer´s desktop
and operation system. Remote access to the Voluson® P8 / Voluson® P6 scanner requires
permission and customer input to run diagnostics.
5-11-2-1 Local Access
1.) If not already in read mode, FREEZE
the image.
2.) Press the F2
key on the control panel and select SYSTEM SETUP to invoke setup desktop.
3.) On the left side of the screen select ADMINISTRATION
and then click on the SERVICE tab.
4.) Enter the password SHE and then click the ACCEPT
button.
5.) Click the CSD
button.
6.) As soon as the GEHC Service Home Page appears, select “GE Service” from the pull-down menu,
enter the “Standard GE Revolving” password (password changes every six months) and then click
[Okay].
The Common Service Desktop (CSD) is started and the [Home] page - containing basic System
Information - appears. The navigation bar at the top of the screen allows to select different tools.
Figure 5-23 Service Login
select : GE Service
enter current GE password
To Next Page
Loading...
Need help?
General
