EasyManuals Logo

Honda CRF450R 2011 User Manual

Honda CRF450R 2011
1058 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
Valve Clearance
(cont’d)
Servicing Your Honda 79
14. Measure the intake valve and exhaust valve
clearances by inserting a feeler gauge (23).
Valve Clearance:
15. Install a new sealing washer (24) and tighten
the cam chain tensioner lifter cover bolt (25).
1. Install the spark plug (page 71).
2. Coat a new O-ring (1) with engine oil and
install it onto the crankshaft hole cap (2).
Apply grease to the crankshaft hole cap
threads. Install and tighten the crankshaft hole
cap to the specified torque:
15 N·m (1.5 kgf·m, 11 lbf·ft)
1. Check that the spark plug hole packing (1) is in
good condition and replace it if necessary.
Apply engine oil to the spark plug hole packing
and install it to the cylinder head cover (2).
2. Check that the cylinder head cover packing (3)
is in good condition and replace it if necessary.
Install the cylinder head cover packing into the
cylinder head cover groove.
IN: 0.16 ± 0.03 mm (0.006 ± 0.001 in)
EX: 0.28 ± 0.03 mm (0.011 ± 0.001 in)
(23) feeler gauge
(24) sealing washer (new)
(25) cam chain tensioner lifter cover bolt
(23)
(23)
(25)
(24)
Crankshaft Hole Cap Installation
(1) O-ring (new)
(2) crankshaft hole cap
(2)
(1)
Cylinder Head Cover Installation
(1) spark plug hole packing
(2) cylinder head cover
(3) cylinder head cover packing
(2)
(3)
(1)
CRF450R_EN.book Page 79 Friday, July 9, 2010 7:04 PM

Table of Contents

Other manuals for Honda CRF450R 2011

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CRF450R 2011 and is the answer not in the manual?

Honda CRF450R 2011 Specifications

General IconGeneral
Engine Type449cc liquid-cooled single-cylinder four-stroke
Bore x Stroke96.0mm x 62.1mm
Compression Ratio12.0:1
TransmissionClose-ratio five-speed
Final Drive#520 chain; 13T/48T
Front BrakeSingle 240mm disc with twin-piston caliper
Rear BrakeSingle 240mm disc
Front Tire80/100-21
Rear Tire120/80-19
Trail114mm (4.5 inches)
InductionPGM-FI, 46mm throttle body
Front Suspension48mm inverted with rebound and compression damping adjustability; 12.2 inches travel
Rear SuspensionPro-Link single shock with rebound and compression damping adjustability; 12.4 inches of travel
Wheelbase58.7 inches
Seat Height37.6 inches
Fuel Capacity1.5 gallons

Related product manuals