User manual of EC160 elevator intelligent integrated machine Installation and wiring
21
Chapter 4 Installation and wiring
This chapter describes the terminals configuration, including main circuit terminal configuration,
control circuit terminals configuration and PG terminals configuration.
Follow the guidelines of these manual and only professional
electricians are allowed to operate, otherwise electric shock may occur.
Breaker is needed between the power supply and the machine,
otherwise fire may occur.
Please ensure the power supply is disconnected before wiring,
otherwise the electric shock may occur.
The grounding terminal should be reliable, otherwise electric shock
may occur.
Do not touch the terminals with hands, otherwise electric shock may
occur.
Do not connect the power supply with U/V/W, otherwise damage may
occur.
Do not connect the wires of braking resistor with the terminals (+) (-) of
DC bus, otherwise electric shock and fire may occur.
Please confirm the voltage degree of the power is in accordance with
that of the machine, otherwise damage may occur.
All terminals connected with the machine should be tightened enough,
otherwise damage may occur.
Ensure there is no objects falling into the machine in the process of
configuration and installation, otherwise damage may occur.
To Next Page
Loading...
Need help?
General
