User manual of EC160 elevator intelligent integrated machine EC160 configuration
2
1.2 Standard functions of software
No. Type Function name Function instruction Remarks
1
System
Direct stop
operation
According to the distance control principle,
generate a running curve
Standard
2
Internal
pre-weighing
compensation
External weighing compensation device is
unnecessary when applying speed loop
and position loop
Standard
3
Autotuning of the
master
Static and dynamic autotuning Standard
4
Hoistway height
autotuning
Hoistway information autotuning before first
running, including the height of each floor
and the position of forced DEC switches.
Standard
5 Full selective
In automatic or attendant state, the elevator
will respond to the car command signal and
the up/down calling button signal during
running at the same time. The passengers
at any floor can call the elevator by
recording the up/down calling signal.
Standard
6 Parallel operation
Connect the corresponding CAN
communication wires to realize parallel
operation
Function
selection
7
Real-time clock
management
Real-time clock chip, can work for 3 years
without power
Standard
8 Manual operator
LCD operator: Chinese/English menu, can
carry out parameters setting, fault inquiry,
state monitoring and parameters uploading/
downloading; simple operator: unavailable
parameters uploading/downloading
Optional
9
Protection
OC protection Protect and stop when overcurrent Standard
10 OV protection Protect and stop when overvoltage Standard
11 OL protection Protect and stop when overload Standard
12 OL protection
The elevator will keep opening when the
elevator is overload in non-inspection state
and the buzzer will alarm. Note: Before the
Standard
To Next Page
Loading...
Need help?
General
